die casting

基本解释

Before I left Buhler within 5 years job is Die Casting Project Manager!
离开布勒前5年的工作是压铸机项目经理！
Form and dimension may also be achieved by a number of alternative processes such as hot or cold extrusion, sand casting, die casting, and precision casting.
形式和尺寸也可以通过其它一些可选工艺来达到，比如热挤出或冷挤出加工，沙模铸造，拉模铸造，或精密铸造。
Tin welding parts and lead-tin alloy die casting, zinc, beryllium bronze, phosphorus copper alloy in electroplating copper with commonly used before also gets to improve adhesion.
锡焊件、铅锡合金、锌压铸件、铍青铜、磷铜等合金在电镀前也常用预镀铜来改善结合力。

Take Derek Lidderdale, vice president of Omni Die Casting in Massillon, Ohio.
FORBES: The Jobs Gambit
Zinc is also important for die-casting, galvanizing and rubber making and can be used as a paint pigment, wood preservative and agricultural fungicide.
FORBES: Gold Is Good, These Five Metals May Be Better
Casting them adrift to die is much worse.
ECONOMIST: Myanmar’s unwanted human flotsam

压铸件
Processing parameters for die casting semi-solid connecting-rod were optimized by simulation. Appropriate processing parameters are as follows:the forming temperature more than 590℃,filling velocity of the ingate more than 2.7m/s and injecting pressure more than 40MPa.
模拟优化了连杆压铸件的压铸工艺,合适的压铸工艺参数为:浆料成形温度在590℃以上,内浇道充填速度为2.7m/s,压射比压在40MPa以上。
压力铸造
压铸模
Design structure of die casting mould was presented, and production ways for part formation were described.
设计给出的叶轮压铸模结构。
压铸工艺
While the part formed by liquid die casting can not be heat treated for its mechanical properties will be sharply reduced after heat treatment.
而液态压铸的零件不能进行热处理，热处理后材料的力学性能显著下降。从对组织和性能的测试分析表明：如果半固态压铸工艺得到进一步优化，零件的力学性能可以进一步提高，半固态成形后热处理的作用将会进一步发挥。
机械工程
模铸件
压模铸法
压模铸造
硬模铸造
压力铸造