apparent viscosity

基本解释

Polyurethane melt is pseudoplastic fluid presenting shear-thinning property. B87 shows higher apparent viscosity than G83 at the same temperature.
熔喷聚氨酯熔体为假塑性切力变稀流体，在同等温度下B87比G83的熔体表观粘度大。
The analysis of microstructure can also reflect the regulation of the effect on the apparent viscosity of factors, such as shear rate, temperature and cooling rate.
显微结构分析也可以反映出剪切速率、温度和冷却速度对表观粘度的影响规律。
The calculation results showed that the friction factor and apparent viscosity of hydrate slurries increase with increasing pressure and flow rate.
计算结果表明，压力高和液体流量大的体系，其摩擦阻力系数和表观粘度值均较高。

表观粘度
When the solid content is relative high, temperature rising will decrease shear stress and apparent viscosity.
同时，在高浓度悬浮液中，温度升高可以降低体系的剪切应力和表观粘度。
表观黏度

表观粘度
The content of EPS was not significant in different yogurts fermented by different composition and starters. There was a no direct relationship between the apparent viscosity and the content of EPS in the yogurt.
不同原料配方、不同发酵剂所形成的酸乳之间EPS的含量都没有显著性差异，导致酸乳表观粘度差异的原因与其中EPS的含量没有直接关系。
表观黏度
At 25℃apparent viscosity of 30% fat stimulation decreased accompanied by rotate speed increase, which was the character of pseudoplastic fluid.
DE值为2.43的脂肪模拟物,在25℃浓度为30%时,表观黏度随着黏度计转子转速的增加表观黏度逐渐降低,即存在明显的剪切变稀现象,具有“假塑性流体”的典型特征。
物理学
表观黏性系数